F1206 Compression Spiral Flush Trim Bit with Bottom Bearing - 1/2 SD - 7/8 CD - 1-3/16 CL - 3-11/16 OL
F1206 Compression Spiral Flush Trim Bit with Bottom Bearing - 1/2 SD - 7/8 CD - 1-3/16 CL - 3-11/16 OL
| Rotation | Compression | Coating | / |
|---|---|---|---|
| Shank Diameter | 1/2" | Router Bits Types | Flush Trim |
| Cutting Diameter | 7/8" | Product Series | F-Series |
| Cutting Length | 1-3/16" | Cutting Edge Type | Solid Carbide |
| Overall Length | 3-11/16" | Measurement | Imperial |
| Flutes | 2 | Machinery Type | Router Table |
| Material | Hardwoods, Softwoods, Laminate, Melamine, Plywood, MDF, HDF, Foamcore, Particle | ||
| Rotation | Compression |
|---|---|
| Shank Diameter | 1/2" |
| Cutting Diameter | 7/8" |
| Cutting Length | 1-3/16" |
| Overall Length | 3-11/16" |
| Flutes | 2 |
| Coating | / |
Couldn't load pickup availability
| Image | SKU | Rotation | Flutes | CD | SD | CL | OL | Stock | Quantity | Price | Cart |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
F1206 | Compression | 2 | 7/8" | 1/2" | 1-3/16" | 3-11/16" | ||||
|
F1205 | Compression | 2 | 7/8" | 1/2" | 1-3/16" | 3-11/16" | ||||
|
F1204 | Downcut | 2 | 1/2" | 1/2" | 1-1/2" | 4-5/16" | ||||
|
F1202 | Upcut | 2 | 1/2" | 1/2" | 1-1/4" | 3-13/16" | ||||
|
F1404 | Compression | 2 | 1/2" | 1/4" | 1" | 2-1/2" | ||||
|
F1403 | Compression | 2 | 1/2" | 1/4" | 1" | 2-5/8" |
Get flawless finishes with Zahyox Spiral Flush Trim Router Bits, designed for trimming end-grain in any direction. Compression solid carbide flush trim bits significantly outperform straight flush trim bits; they are sharper and more durable, excelling in producing extremely smooth finishes and handling large-scale trimming in demanding materials and applications.
FEATURES:
- 7/8" Cutting Diameter, 1/2" Shank, 1-3/16" Cutting Length, 3-11/16" Overall Length.
- Made of premium tungsten carbide.
- Industrial grade technology, super strength, and durable.
- The stable knife body can ensure high-quality and efficient trimming results.
- Equipped with bottom bearings, suitable for trimming, flush cutting, and pattern template woodworking on softwood, hardwood, laminate, etc.
- Resulting in a smooth and clean cut without chips and burrs.
NOTE:
- We suggest using this bit better on a router table. Due to its high working resistance, please pay attention to the RPM for safety or it would be dangerous.
- The cutting thick of the workpiece must be under the cutting height of the router bit, to prevent kickback and wobble!
- When cutting harder or denser wood, please decrease the cutting output and feed slowly.
- Always wear proper protective gear when working.
- WWilliamRated 5 out of 5 starsSmooth cutting for difficult grain
This works great for those times when you're trimming edges of plywood since it provides smooth cuts on both top and bottom sides at the same time. For hardwood I prefer a bigger diameter bit on a 1/2 shank, but for plywood this works nicely.
- CCalvinRated 5 out of 5 starsGood For Roughing or Pattern Following
Unlike most flush trim router bits that have a flat blade striking the surface, this one on the other hand has a spiral blade design guaranteeing a smooth cut. Not only that, but it is made with solid tungsten carbide cutter with high hardness. Careful handling it because it is way sharper than any other bits that I have, and over the years I have collected a lot e.g. Freud, Whiteside etc. I mean it is razor sharp, incredibly so. The 1/2" shank provides a more stable platform.
- LLarryRated 5 out of 5 starsNot to be taken lightly.
You’re going to need a powerful router to move this bit. It’s a monster. It is very sharp. I would say this best in a router table with a 3hp+ router. It is suitable for trimming a lot of material. Be sure to wear you safety gear with this one!
- JDJohn D.Rated 5 out of 5 starsVery nice trim router bit!
Does exactly what I expected!
- DWDavid W.Rated 4 out of 5 starsExcellent
Nice finish. Good for fine projects. Just a little expensive